TUMBU
Smart LED Device Setup Guide
by Homespun Gallery
📦 What You Need
🚀 Setup Steps
Search for 'Tumbu' on the App Store (iOS). For Android, it will be available on Google Play soon. For now, you can download and install the app using this link: https://logbasics.com/Tumbu
Connect to power. Wait for blue breathing LEDs
Create account, tap '+' or 'Add Device'
Choose device named 'TUMBU-XXXX-XXX'
Select your 2.4GHz network and enter password
Device may take 1-2 minutes to appear. Pull down to refresh.
🍎 iPhone/iPad Users
Important: Connect your iPhone/iPad to the WiFi network you want your Tumbu device to use BEFORE starting setup. The app will auto-detect your current network.
Allow permissions: Bluetooth, Location, and Local Network when prompted.
🔧 Quick Troubleshooting
- Check device is powered on (blue LEDs)
- Move phone closer (within 10 feet)
- Enable Bluetooth on phone
- Verify WiFi password is correct
- Confirm using 2.4GHz network (not 5GHz)
- Check router is working
- Try factory reset (see below)
- Check device power
- Verify WiFi router is on
- Pull down to refresh app
🔄 Factory Reset (If Needed)
1. Find the BLUE BUTTON on bottom of device
2. Press and HOLD for 5 seconds
3. Keep holding until LEDs blink red 10 times
4. Release - device restarts with blue breathing pattern
⚠️ Warning: Erases all settings
✨ What You Can Do
On/Off, Brightness 0-100%
Rainbow, Fire, Ocean, etc.
Choose any color
Save 6 favorite effects